Butterfly Valves provide two-position (On/Off), floating and modulating control and are available in a variety of configurations.

Temperature sensor which senses the temperature changes and sends the information to the output – computer or controller.

A thermostat is a component which senses the temperature of a system so that the system’s temperature is maintained near a desired setpoint.

Communicating controllers exchange information on energy usage via KNX®, thus making certain that the only plant components put into operation

Rotary valves are primarily used in energy generation and distribution. Typical applications are if an additional boiler needs to be connected, or for the switching over of storage tank charging

Humidity and temperature sensor which senses changes in the humidity and temperature and sends the information to the output – computer or controller.

PICV is a valve that enables modulating control of flow rate but where the flow characteristic may vary depending on the pressure differential across the valve.

We offer Pressure sensors for liquids and gases, for refrigerant and Differential pressure sensor air and non-aggressive gas

An actuator is a component of a machine that is responsible for moving or controlling a mechanism or system.

The flow sensor is suited to continuously measure flow or monitor liquids such as hot water, heating water, or standard water-glycol mixes in HVAC plants and applications.

Air quality sensor which senses the air quality changes and sends the information to the output – computer or controller. We have CO2/VOC, CO2/T and CO2/T/r.h. are available for room and duct applications with an attractive display.