The MCC panels comply with international standards and are available with multiple power stabs that help in supporting high capacity industrial motors as per the client specifications.

• Fully type-tested panels including internal arc fault test
• Form 2, 3 and 4 types of segregations
• Busbar rating up to 7000 A
• Available in fixed and draw out type of design
• Provision of forced ventilation when required
• IP ratings up to IP65
• Front or rear access with pre-fabricated bolts on base for protective devices
• Fault withstand of up to 50KA for 3 Seconds
• Panels in compliance with all international standards

• Dry Type (Cast Resin), power range up to 3.15MVA and voltages up to 36 KV (MV) or 1000V (LV)
• Application areas: In modern functional buildings, residential and work environments

• Liquid Immersed (oil type), power range up to 2.5MVA for normal distribution application and 6.3MVA for special industrial application and voltages up to 33 KV (MV) or 1000V (LV)
• Application areas: In suburban areas, utilities and industrial customers.

• Up to 17.5 kV, 31.5 kA, 2500A busbar, 2500A feeder Up to 24 kV, 25 kA, 2500A busbar, 2000A feeder
• Metal enclosed
• Single busbar
• Gas-insulated
• Hermetically enclosed
• Factory-assembled, type-tested switchgear according IEC 62 271-200

Sub-main distribution boards are type-tested and ideally suited for secondary distribution due to the robust and standardized design, ensuring a safe and reliable sub-power distribution.

• Available in Form 2, 3 and 4 segregations with 3 Phase boards ranging from 4 ways up to 24 ways and has a option for Isolator and MCCB incomers (Both Auto & Non-Auto) and to add on DIN rail extension boxes to enable mounting of other modular devices
• Fully encapsulated tinned copper busbars up to 800 A and has one piece busbars to avoid joint hotspots
• Fault withstand 35KA for 1 Second up to 250A and fault withstand 50KA for 1 Second from 400 A to 800 A
• Floor or wall-mounted with surface and flush-mounting options and IP ratings available up to IP 65, upon request with adequate space for cabling
• Provision to add on metering and cable extension boxes and finishing as per RAL 7032. Other finishes available upon request.
• Panels in compliance with latest international standards and local regulation

A final distribution board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits.

• Form 2 segregation as standard
• Sheet steel enclosures ranging from 1.2 mm thickness (standard) up to 1.5 mm (special project requirements)
• Available in row type and pan assembly type
• IP ratings up to IP42
• Single phase and three phase boards available up to 24 ways
• Multiple row DB’s available up to 6 rows (16 and 24 modules)
• Floor or wall-mounted with surface and flush-mounting options
• Panels in compliance with latest international standards and local regulation

• Up to 24 kV, 25 kA, 1250 A busbar, 1250 A feeders
• Metal-enclosed
• Single busbar
• Air-insulated technology combined with a gas-insulated switching function
• Factory-assembled, type-tested switchgear according to IEC 62271-200

Capacitor banks are primarily used to improve the power factor in the network. They also improve the voltage stability and reduce network losses. Improving the power factor also means a higher power transmission capability and increased control of the power flow.

• Form 2 segregation as standard
• Available in sheet steel enclosures up to IP55
• Available with or without harmonic filters
• HRC fuse up to 200KA
• Capacitor duty special contactors
• Micro controller based regulators
• Top and bottom cable entry options
• Adequate forced ventilation

• Up to 24 kV
• Up to 25 kA
• Up to 630A
• Single busbar
• Type-tested
• Metal enclosed
• Climate independent
• Maintenance free
• Individual panels and block versions
• No gas work at site
• Fast and easy to install

A feeder pillar provides local isolation to your electrical distribution equipment, protecting both the cabling and the transformer from faults.Our extensive range of feeder pillars meets all industry regulations.

• Form 2 segregation standard
• Busbar rating up to 630 A
• Capable of accepting MCCB’s, MCB’s and RCBO’s.
• Capable of accepting a wide range of control devices
• Option to add on cable extension boxes
• IP Rating up to IP66
• Sheet steel or high quality molded fiberglass enclosures
• Easy replacement of protective control devices
• Panels in compliance with latest international standards and local regulation

• Up to 36 kV
• Up to 20 kA
• Up to 630A
• Single busbar
• Type-tested
• Metal enclosed
• Climate independent
• Maintenance free
• Individual panels and block versions
• No gas work at site
• Fast and easy to install